openATTIC Web UI Tests - E2E Test Suite

This section describes how our E2E test environment is set up, as well as how you can run our existing E2E tests on your openATTIC system and how to write your own tests. If you are looking for Web UI Unit tests documentation please refer to openATTIC Web UI Tests - Unit Tests.

By continuously writing E2E-tests, we want to make sure that our graphical user interface is stable and acts the way it is supposed to be - that offered functionalities really do what we expect them to do.

We want to deliver a well-tested application, so that you - as users and community members - do not get bothered with a buggy user interface. Instead, you should be able to get started with the real deal - MANAGING storage with openATTIC.

About Protractor

Protractor is a end-to-end test framework, which is especially made for AngularJS applications and is based on WebDriverJS. Protractor will run tests against the application in a real browser and interacts with it in the same way a user would.

For more information, please refer to the protractor documentation.

System Requirements

Testing VM:

  • Based on our experience,the system on which you want to run the tests needs at least 4GB RAM to prevent it from being laggy or very slow!

Install Protractor


Protractor and most of its dependencies will be installed locally when you execute npm install on webui/.

  • (optional) npm install -g protractor@5.1.2
  • apt-get install openjdk-8-jre-headless oracle-java8-installer
  • Choose/Install your preferred browser (Protractor supports the two latest major versions of Chrome, Firefox, Safari, and IE)
  • Please adapt the protractor.conf.js file which can be found in /openattic/webui/ to your system setup - see instructions below

Protractor Configuration

Before starting the tests, you need to configure and adapt some files.

Use Multiple Browsers

When using Chrome and Firefox for the tests, you could append the following to your protractor.conf.js so the test will run in both browsers:

exports.config.multiCapabilities = [
    {'browserName': 'chrome'},
    {'browserName': 'firefox'}

To prevent running both browsers at the same time you can add:

exports.config.maxSessions = 1;

Set up configs.js

Create a configs.js file in folder e2e and add the URL to you openATTIC system as well as login data - see below:

(function() {
  module.exports = {
    urls: {
      base: '<proto://addr:port>',
      ui: '/openattic/#/',
      api: '/openattic/api/'
    //leave this if you want to use openATTIC's default user for login
    username: 'openattic',
    password: 'openattic',

If you are using a Vagrant box, then you have to set urls.ui to /#/ and urls.api to /api/.

In order to run our graphical user interface tests, please make sure that your openATTIC system at least has:

  • One LVM volume group
  • One ZFS zpool

and add them to e2e/configs.js.


For more information have a look at e2e/configs.js.sample.

It is important that the first element in this config file is your volume group.

If you do not have a ZFS zpool configured and you do not want to create one, you can of course skip those tests by removing the suite from protractor.conf.js or putting them in to the comment section.

Start webdriver manager Environment

Go to webui/ and type the following command:

$ webdriver-manager start or: $ npm run webdriver

Make Protractor Execute the Tests

Use a separate tab/window, go to webui/ and type:

$ npm run protractor (-- --suite <suiteName>)


Without a given suite protractor will execute all tests (and this will probably take a while!)

Starting Only a Specific Test Suite

If you only want to test a specific action, you can run i.e. $ npm run protractor -- --suite general.

Available test cases can be looked up in protractor.conf.js, i.e.:

suites: {
  //suite name       : '/path/to/e2e-test/file.e2e.js'
  general            : '../e2e/base/general/**/general.e2e.js',


When running protractor.conf and the browser window directly closes and you can see something like “user-data error” (i.e. when using Chrome) in your console just create a dir (i.e. in your home directory) and run google-chrome --user-data-dir=/path/to/created/dir

How to Cancel the Tests

When running the tests and you want to cancel them, rather press CTRL+C on the commandline (in same window in which you’ve started protractor) than closing the browser. Just closing the browser window causes every single test to fail because protractor now tries to execute the tests and can not find the browser window anymore.

E2E-Test Directory and File Structure

In directory e2e/ the following directories can be found:

+-- base
|   '-- auth
|   '-- datatable
|   '-- general
|   '-- pagination
|   '-- pools
|   '-- settings
|   '-- taskqueue
|   '-- users
+-- ceph
|   `-- iscsi
|   `-- nfs
|   `-- pools
|   `-- rbds
|   `-- rgw

Most of the directories contain a *form.e2e.js in which we only test things like validation, the number of input fields, the title of the form etc. Actions like add, clone etc. are always in a separate file. This makes it better to get an overview and prevents the files from getting very huge and confusing.

Writing Your Own Tests

Please include common.js in every .e2e.js file by adding var helpers = require('../common.js');. In some cases (depending on how you’ve structured your tests) you may need to adapt the path.

By including it as var helpers you can now make use of helper functions from common.js, i.e. the setLocation function, you just have to add helpers. to the function: helpers.setLocation( location [, dialogIsShown ] ).

The following helper functions are implemented:

  • setLocation
  • leaveForm
  • checkForUnsavedChanges
  • get_list_element
  • get_list_element_cells
  • delete_selection
  • search_for
  • search_for_element
  • login
  • hasClass

When using more than one helper function in one file, please make sure that you use the right order of creating and deleting functions in beforeAll and afterAll.

If you need to navigate to a specific menu entry (every time!) where your tests should take place, you can make use of:


  //always navigates to menu entry "ISCSI" before executing the actions
  //defined in 'it('', function(){});'


Style Guide - General e2e.js File Structure / Architecture

You should follow the official Protractor style guide.

Here are a few extra recommendations:

  • describe should contain a general description of what is going to be tested (functionality) in this spec file i.e. the site, menu entry (and its content), panel, wizard etc. example: “should test the user panel and its functionalities”
  • it should describe, what exactly is going to be tested in this specific it-case i.e. (based on the described example above): “should test validation of form field “Name”“
  • Elements which are going to be used more than once should be defined in a variable on top of the file (under described)
  • If something has to be done frequently and across multiple spec files one can define those steps in a function defined in above mentioned common.js and use this function in specific spec files i.e. if you always/often need a user before you can start the actual testing you can define a function create_user which contains the steps of creating a user and use the create_user function in the tests where it’s required. Therefore you just have to require the common.js file in the spec file and call the create_user function in the beforeAll function. This procedure is a good way to prevent duplicated code. (for examples see common.js -> login function)
  • Make use of the beforeAll/afterAll functions if possible. Those functions allow you to do some steps (which are only required once) before/after anything else in the spec file is going to be executed. For example, if you need to login first before testing anything, you can put this step in a beforeAll function. Also, using a beforeAll instead of a beforeEach saves a lot of time when executing tests. Furthermore, it’s not always necessary to repeat a specific step before each ìt section. The afterAll function is a good way to “clean up” things which are no longer needed after the test. If you already have a function (i.e. create_user) which creates something, you probably want to delete it after the tests have been executed. So it makes sense having another function, which deletes the object (in this case a delete_user-function) that can simply be called in afterAll. In addition we decided to put an afterAll at the end of each test file which contains a console.log("<protractor suite name> -> <filename>.e2e.js"). By doing so it is possible to track which test in which file is currently executed when running all tests.
  • In a bunch of openATTIC HTML files (see openattic/webui/app/templates) you’ll find css classes which are especially set for tests (those test classes are recognizable by the tc_-term which stands for “test class”). This is very useful when protractor finds more than one element of something (i.e. “Add”-button) and you can specify the element by adding or just using this tc_class of the element you’re looking for to the locator. This makes the needed element unique (i.e.: element(by.css('oadatatable .tc_add_btn')).click();)
  • Tests should be readable and understandable for someone who is not familiar in detail with tests in order to make it easy to see what exactly the test does and to make it simple writing tests for contributors. Also, for someone who does not know what the software is capable of, having a look at the tests should help understanding the behavior of the application
  • Always navigate to the page which should be tested before each test to make sure that the page is in a “clean state”. This can be done by putting the navigation part in a beforeEach function - which ensures that it sections do not depend on each other as well.
  • Make sure that written tests do work in the latest version of Chrome and Firefox
  • The name of folders/files should tell what the test is about (i.e. folder “user” contains “user_add.e2e.js”)

Tips on how to write tests that also support Firefox

Let protractor only click on clickable elements, like a, button or input.

If you want to select an option element use the following command to make sure that the item is selected (issue #480):

browser.actions().sendKeys( protractor.Key.ENTER ).perform();

Debugging your tests

To set a breakpoint use browser.pause() in your code.

After your test pauses, go to the terminal window where you started the test.

You can type c and hit enter to continue to the next command or you can type repl to enter the interactive mode, here you can type commands that will be executed in the test browser.

To continue the test execution press ctrl + c.